Brother HL-1260 service manual Tray Sensor Holder, Roller Holder

1.20Tray Sensor Holder

(1)Disengage the DU (Duplex) detection actuator from the hook and slide it to the outside.

(2)Loosen the screw and remove the holder by lifting it from the chassis.

PE sensor actuator tray, PE actuator link, DU detection actuator

1)Remove the PE actuator link from the PE sensor actuator tray.

2)Remove the PE actuator link from the tray sensor holder.

3)Remove the PE sensor actuator tray from the tray sensor holder.

4)Remove the DU detection actuator from the tray sensor holder.

DU detection actuator

Screw

PE actuator link PE sensor actuator tray

Hook

Tray sensor holder

Figure 4.32

1.21Roller Holder

(1)Remove the gear 28.

(2)Loosen and pull out the 2 screws.

Roller holder

Screws

Gear 28

Figure 4.33

IV - 14