Storing/Editing One-Touch

Erasing Addresses Registered in One-Touch

This section describes the procedure for erasing addresses registered in one-touch.

This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the Select Send Type screen, as follows:

–In the Select Send Type screen, press the right Any key to select <One-touch>.

–Use [▼], [▲] or (Scroll Wheel) to select the one-touch you want to erase.

–Press the left Any key to select <Reg/Edit/Erase>.

–Use [▼], [▲] or (Scroll Wheel) to select <Erase from One-touch>, then press [OK].

–Follow the procedure described in this section from step 7.

Book Address Storing/Editing

1

Press

(Main Menu).

2

Press the right Any key to select

<Additional Func.>.

3

Use [▼], [▲] or

(Scroll Wheel) to select

<Address Book Settings>, then press [OK].

If a password has been set for the Address Book, enter the password to enter Address Book Settings menu. Enter the password using – (numeric keys), then press [OK]. (For details about the Address Book password, see “Security,” in the e-Manual.)

4

Use [▼], [▲] or

(Scroll Wheel) to select

<Register One-touch>, then press [OK].

5

Use [▼], [▲] or

(Scroll Wheel) to select

the one-touch you want to erase, then

press [OK].

–You cannot erase multiple one-touch destinations at the same time.

–If the desired one-touch is not displayed, use

[▼], [▲] or (Scroll Wheel) to scroll to the desired one-touch.

3-50