Job Recall

Job Recall

You can recall the last three addresses, scan settings, and send settings which have been set in the <Log>, and then send your documents.

–The settings such as destinations, scan settings and send settings are stored in a log. The actions below after you change settings are not recorded in a log:

•Pressing the (Start) or (Reset) or (Main Menu).

•Activation of the Auto Clear mode.

•Turning OFF the machine.

–Identical send settings are stored only once in recall memory.

–If <Restrict New Addresses> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is set to <On>, the addresses specified from the Address Book are only recalled.

–The settings that were stored in memory are not erased even when the main power is turned OFF.

–If <Restrict Sending From Log> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is set to <On>, you cannot specify a destination using the <Log>. (See “Security,” in the e-Manual.)

1

Fax

2

3

Place your originals.

4

Use [▼], [▲] or

(Scroll Wheel) to select

 

 

<Log>, then press [OK].

5

Use [▼], [▲] or (Scroll Wheel) to select

<Mode 1>, <Mode 2> or <Mode 3>, then

press [OK].

Press (Main Menu).

Use [▼], [▲] or (Scroll Wheel) to select <Send/FAX>, then press [OK].

You can check the recall settings by pressing the left Any key to select <Details>.

5-64