Selecting Paper Source

Using Stack Bypass Tray with Irregular Sizes of Paper

This section describes how to copy onto non-standard-sized paper using the stack bypass tray.

–If <Stack Bypass Paper> setting in <Paper Settings> from the Additional Functions screen is set to <Off>, the paper size/type setting screen appears when you load a paper in the stack bypass tray. If Stack Bypass Standard Settings is set to <On>, copying can be performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-20.)

–If you set envelopes, transparencies, or labels in the stack bypass tray, the collate mode cannot be selected.

1

2

3

Set originals.

For details, see “Placing Originals,” on p. 2-4.

Press (Main Menu).

Use [▼], [▲] or (Scroll Wheel) to select <Copy>, then press [OK].

4

5

6

Load the paper into the stack bypass tray.

Use [▼], [▲] or (Scroll Wheel) to select <Custom Size>, then press [OK].

Press [OK] to select the horizontal length <X>.

Copying

4-13