Troubleshooting

If <Set the correct paper. > is displayed

If <Set the correct paper. > is displayed

When <Set the correct paper. > appears on the display, the size of the paper in the paper drawer or stack bypass tray is different from that of the paper specified in <Drawer 1>, <Drawer 2>*, or <Stack Bypass Paper> of <Paper Settings>. You need to load the correct size paper or change the paper size in <Drawer 1>, <Drawer 2>*, or <Stack Bypass Paper> of <Paper Settings>.

* Only when the optional Paper Drawer (Paper Drawer 2) is attached.

For print jobs, you need to specify the paper size from your computer.

Reloading the Paper

1

Load the correct size paper as shown on

the display, then press [OK] to resume the

job.

The machine re-starts printing.

Changing the Paper Size Setting

●For the stack Bypass Tray

If you set the standard settings for stack bypass tray, follow the procedures below to change paper size.

1

Press

(Main Menu).

2

Press the right Any key to select

<Additional Func.>.

12-36