6 | Use [▼], [▲] or | (Scroll Wheel) to select |
the original size, then press [OK]. | ||
To switch to the inch sizes, press the left Any key to select <A/B Sizes>.
7 | Use [▼], [▲] or | (Scroll Wheel) to select |
the hole punch location, then press [OK]. | ||
To enter values in millimeters, press the left Any key to select <Enter mm>.
|
| Erasing Shadows/Lines |
8 | Use [▼], [▲] or | (Scroll Wheel) to select |
the frame erase width, then press [OK]. | ||
–The default setting is <3/4" (18 mm)>. The maximum original frame erase width that you can set is <13/16" (20 mm)>.
–If you want to change the value, press 
(Clear) before entering the new value.
–If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
–When entering the value in millimeters, you
can also use [▼], [▲], 
(Scroll Wheel), or 
– 
(numeric keys).
9 | Use – (numeric keys) to enter the |
desired copy quantity (1 to 99). |
Copying