Copying

Erasing Shadows/Lines

 

6

Use [▼], [▲] or

(Scroll Wheel) to select

the original size, then press [OK].

 

To switch to the A/B Sizes, press the left Any key

 

to select <A/B Sizes>.

7

 

Enter the each erase width value:

 

■If you want to specify the erase width

 

value for center:

① Use [▼], [▲] or (Scroll Wheel) to select <Center>, then press [OK].

To enter values in millimeters, press the left Any key to select <Enter mm>.

②Use [▼], [▲] or (Scroll Wheel) to enter a frame erase width value, then press [OK].

–The default setting is <3/8" (10 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.

–When entering the value in millimeters, you

can also use [▼], [▲], (Scroll Wheel), or – (numeric keys).

–If you want to change the value, press (Clear) before entering the new value.

–If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.

■If you want to specify the erase width value for all sides:

①Use [▼], [▲] or (Scroll Wheel) to select <All Sides>, then press [OK].

4-46