If the Delivery Feeder Unit Is Not Installed Correctly
If the Delivery Feeder Unit Is Not Installed Correctly
If the delivery feeder unit is not installed correctly, an error code <E00012> appears on the display. Follow the procedure below to install the delivery feeder unit correctly. If the error code does not disappear after the delivery feeder unit is installed correctly, contact Canon Customer Care Center.
1
Troubleshooting
–You have to remove the delivery feeder unit and
–When you remove the delivery feeder unit, you have to turn the main power switch OFF.
–Sending or receiving documents cannot be done when the main power switch is OFF or the power cord is disconnected.
–If the main power switch is turned OFF, all jobs waiting in the print queue will be erased.
–Documents received into memory and documents stored for delayed send will be retained for approximately 60 minutes after the power cord has been disconnected.
Turn OFF the main power switch and | 2 | Open the front cover. |
disconnect the power cord. | If you are using the stack bypass tray, close it | |
|
| before opening the front cover. |
|
| Open the front cover gently holding the handle |
|
| (A). |
Make sure that the Processing/Data Indicator is turned off and check the display to confirm that a job is not being processed.