Receiving Documents in Memory without Printing Out (Memory Lock Reception)
6 | Use [▼], [▲] or | (Scroll Wheel) to select |
<Off> or <On>. |
|
– You cannot store a password that only consists of zeros, such as <0000000>.
– If you enter fewer than seven digits, the machine stores the password with leading zeros.
Example: If <02> or <002> is entered, <0000002> is stored.
– If you make a mistake when entering the password, press 
(Clear), then enter the correct password.
| – <Off>: Does not use the memory lock |
|
|
| ||
|
| reception mode. If you select <Off>, press | 8 | Set the machine to print an RX report or | ||
|
| [OK], then go to step 12. | ||||
| – <On>: Uses the memory lock reception | not. | ||||
|
| mode. If you select <On>, press the right Any |
|
| ||
|
| key to select <Option>, then go to the next |
|
| ||
|
| step. |
|
|
| |
7 | If you want to set or change a password |
|
| |||
for the Memory Lock mode, enter a |
|
|
| |||
| password (up to seven digits) using | – |
|
| ||
|
| (numeric keys), then press [OK]. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| If you want to print an RX report when receiving | |
|
|
|
|
| ||
|
|
|
|
| documents, use [▼], [▲] or (Scroll Wheel) to | |
|
|
|
|
| select <On>, then press [OK]. | |
|
|
|
|
| If you do not want to print an RX report, select | |
|
|
|
|
| <Off>, then press [OK]. | |
|
|
|
|
|
|
|
|
|
|
|
| If you want to print an RX report, you need also to | |
| If you set a password, it will be necessary to |
| ||||
| enter the password whenever you want to |
| set <RX Report> to <On>. (See “Introduction of | |||
|
| the Machine,” in the | ||||
| change the Memory Lock mode settings, or |
| ||||
|
|
|
| |||
| cancel the Memory Lock mode. |
|
|
| ||
| If you do not want to set the Memory Lock with |
|
| |||
| a password, press [OK] without entering any |
|
|
| ||
| numbers. |
|
|
| ||
Fax