Media Print and Originals
Loading Paper
■If you are loading envelopes into the stack bypass tray:
①Take five envelopes, loosen them as shown, and then stack them together.
Repeat this step five times for each set of five envelopes.
②Place the envelopes on a clean, level surface, and press all the way around the envelopes by hand, in the direction of the arrows, to remove any curls. Repeat this step five times for each set of five envelopes.
Take particular care to spread the envelopes out in the direction that they will be fed.
③Hold down the four corners of the envelopes firmly, so that they and the sealed or glued portion stay flat.
–Do not print on the back side of the envelopes (the side with the flap).
–If the envelopes become filled with air, flatten them by hand before loading them into the stack bypass tray.