Selecting Paper Source

Using Stack Bypass Tray with Standard Paper Sizes

This section describes how to copy onto standard-sized paper using the stack bypass tray.

If <Stack Bypass Paper> setting in <Paper Settings> from the Additional Functions screen is set to <Off>, the paper size/type setting screen appears when you load a paper in the stack bypass tray. If Stack Bypass Standard Settings is set to <On>, copying can be performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-20.)

1

2

3

Set originals.

For details, see “Placing Originals,” on p. 2-4.

Press (Main Menu).

Use [▼], [▲] or (Scroll Wheel) to select <Copy>, then press [OK].

4

Load the paper into the stack bypass tray.

5

Use [▼], [▲] or

(Scroll Wheel) to select

the desired paper size, then press [OK].

You can select from the following paper sizes: <LTR>, <LGL>, <STMT>, <EXEC>, <FLSC>, <OFI>, <B-OFI>, <M-OFI>, <G-LTR>, <G-LGL> For details, see “Paper Requirements,” on p. 2-7.

Copying

The available paper sizes will vary depending on the country where the unit was purchased.

4-11