Error Messages
Message | Description | Action |
Replace the toner cartridge. | Printing is not possible because the | Replace the toner cartridge. (See |
| toner has run out. | “Replacing the Toner Cartridges,” on |
|
| p. |
|
|
|
Return page 1 to the top, and then | Scanning was stopped due to a | Arrange the originals in page order with |
press the Start key. | problem with the feeder. | the first page on top. Place the originals |
|
| back into the feeder’s original supply |
|
| tray, and press (Start). |
|
|
|
Set the correct paper. | – The paper size is not appropriate | – Set the paper size to <LTR>, <LGL>, |
| for printing a report or list. | <STMT>, <EXEC>, <FLSC>,<OFI>, <B- |
|
| OFI>, |
|
| <Custom Size>, and then load paper |
|
| of the same size. |
| – The paper ran out while printing a | – Load paper in the paper drawer or |
| received document, report or list. | stack bypass tray. |
|
|
|
Set the IP Address. | This machine is not set with an IP | Specify the IP Address Settings in |
| address. | TCP/IP Settings in Network Settings |
|
| in System Management Set (from the |
|
| Additional Functions screen), then turn |
|
| the machine’s main power OFF and |
|
| back ON again. (See “Network Settings,” |
|
| or “Setting Up the Machine,” in the e- |
|
| Manual. |
|
|
|
The counter has reached the set | You cannot print because the set | Contact your system manager. |
value. | page limit for either scans, prints, |
|
| or copies in the department ID |
|
| management function has been |
|
| reached. |
|
|
|
|
Troubleshooting