■To print on the back side of preprinted paper
①Load the preprinted paper face up into the stack bypass tray, as shown in the illustration below.
The screen for selecting the paper size appears.
Loading Paper
–When loading paper into the stack bypass tray, align the paper stack neatly between the slide guides. If the paper is not loaded correctly, a paper jam may occur.
–If you are printing on heavyweight paper or envelopes using the stack bypass tray, and find that the paper or envelopes are not being fed smoothly or evenly through the stack bypass tray, remove the paper or envelopes, curl the feeding edges upward approximately 1/8"
(3 mm), and then reload the paper or envelopes. Curling the feeding edges enables the rollers to grip the paper or envelopes as they are fed into the machine from the stack bypass tray.
Media Print and Originals
–If there are instructions on the paper package about which side of the paper to load, follow those instructions.
–When the paper is loaded into the stack bypass tray, the side facing down is the one printed on.
–If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reload it.