Media Print and Originals
Loading Paper
1 | Open the stack bypass tray. | 3 | Load the paper into the stack bypass tray. |
| – Insert the paper stack as far as it will go. |
– When you print on paper which has logos or patterns already printed on it), see “Relationship between Original Orientation and Preprinted Paper Output Chart,” on p. 2- 24.
| If the paper size you are going to load into the |
|
| stack bypass tray is different from the paper size |
|
| stored in stack bypass tray Standard Settings, set |
|
| stack bypass tray Standard Settings to ‘Off’ in | ■Before inserting paper |
| Common Settings (from the Additional Functions | |
| screen). (See “Setting Paper Size and Type,” on | ①When you use the stack bypass tray to |
| p. 2‑20.) | |
| make copies, straighten out curled paper | |
|
| |
|
| prior to use, as shown below. Curled paper |
2 | Adjust the slide guides to match the size | may cause a paper jam. |
| ||
of the paper. |
|
| ②If there is difficulty in straightening out | |
If you are feeding large size paper, pull out the | curled paper, curl the front edges of the | |
paper upward, as shown below. | ||
auxiliary tray, and extend the tray extension. | ||
|