6 | Use [▼], [▲] or | (Scroll Wheel) to select |
the original size, then press [OK]. | ||
To switch to the A/B Sizes, press the left Any key to select <A/B Sizes>.
■If you want to set the same width for all four borders:
①Use [▼], [▲] or 
(Scroll Wheel) to enter a frame erase width value, then press [OK].
–The default setting is <3/16" (6 mm)>. The maximum original frame erase width that you can set is <1 15/16" (50 mm)>.
–To enter values in millimeters, press the left Any key to select <Enter mm>. When entering the value in millimeters, you can also use [▼], [▲], 
(Scroll Wheel), and 
–
–If you want to change the value, press 
(Clear) before entering the new value.
–If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
Erasing Shadows/Lines
■If you want to set the top, left, right, and bottom widths independently:
①Press the right Any key to select <Adj. Each Dim.>.
②Use [▼], [▲] or 
(Scroll Wheel) to select the desired frame erase borders, then press [OK].
Copying
To enter values in millimeters, press the left Any key to select <Enter mm>. When entering the value in millimeters, you can also use [▼], [▲], 
(Scroll Wheel), and 
–