①Feeder

Originals placed in the Feeder are automatically fed sheet by sheet to the scanning area. The feeder also automatically turns over two-sided originals to make one- or two-sided copies.

②Slide Guides

Adjust the slide guides to match the width of the originals.

③Original Supply Tray

Originals placed here are automatically fed sheet by sheet to the scanning area of the platen glass. Place originals into this tray with the surface that you want to scan face up.

④Original Output Tray

Originals that have been scanned from the original supply tray are output to the original output tray in the order that they are fed into the feeder.

⑤Original Stopper

Prevents the originals from falling off the paper delivery tray.

Open the stopper from its original position for LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper.

⑥Control Panel Machine controls.

⑦Stack Bypass Tray

Feeds non-standard size or thick/thin type paper stacks.

⑧Stack Bypass Tray Extension Pull out to load paper stack.

⑨Slide Guides for Stack Bypass Tray Adjusts to the width of the paper.

Machine Components

⑩Paper Stopper

Prevents the paper from falling off the paper delivery tray.

Open the stopper from its original position for LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper.

⑪Paper Delivery Tray

Copies, prints and faxes are output to the paper delivery tray.

⑫Main Power Switch

Press to the “I” side to turn the power ON.

⑬USB Port

Connect the USB (Universal Serial Bus) cable.

⑭Ethernet Port

Connect the network cable.

⑮External Device Jack Connect an external device.

⑯Telephone Line Jack

Connect the external telephone cable.

⑰Paper Drawer

Holds up to 250 sheets of paper (20 lb (75 g/m2)).

⑱Optional Cassette Feeding Unit-AC1 Holds the additional paper supply. Up to 500 sheets of paper (20 lb (75 g/m2)) can be held.

Machine the Using Before

1-3