Fax
Specifying Destinations
6 | Repeat step 4 and 5 until all the |
destinations are set. |
–Only one new destination can be specified. If you add destinations, specify them from Address Book.
–You cannot specify the detail settings for each destination.
7 Press 
(Start).
–Scanning starts if the original is placed in the feeder, and the scanned data is sent to the specified destination when scanning is complete.
–To cancel scanning, press the left Any key to select <Cancel> or press 
(Stop).
8 | Use [▼], [▲] or | (Scroll Wheel) to select |
the original size, then press [OK]. | ||
9 Press 
(Start).
10 | Follow the instructions on the display, | |
then press | (Start) once for each | |
original.
11 | When scanning is complete, press the |
right Any key to select <Done>. |
–Scanning starts, and the scanned data is sent to the specified destination when scanning is complete.
–To cancel scanning, press the left Any key to select <Cancel> or press 
(Stop).