Copying

1

2

3

Press [Done] on the pop-up screen that appears while the machine is printing. If the job displayed on the touch panel display is from a function other than the Copy

function, press [Done], then press (COPY) to display the Copy Basic Features screen. This part of the procedure is not necessary if the machine is in the waiting state.

Place your originals.

Set the desired copy modes and paper source.

4 Press (Start).

If you specify a reserved copy job while the machine is in the waiting state, copying automatically begins when the machine is ready.

If you specify a reserved copy job while the machine is printing, copying of the new job automatically begins when the current job is complete. If the following screen is displayed, press [OK], then try reserving the job again after the current job is complete.

To cancel a previously set copy mode, press (Reset).

3‑20