1

2

3

Press (SEND).

Place your originals.

Specify the destination.

–To cancel Direct sending mode, press [Direct] again.

–For instructions on setting the Delayed Send or Stamp mode, see Chapter 4, “Sending and Receiving,” in the Reference Guide.

4

5

6

For more information on specifying the destination, see “Specifying Destinations,” on p. 4‑32.

Specify the desired send options.

For instructions on specifying the scan settings, see “Scan Settings,” on p. 4‑16.

①

②

①Press [Direct].

② Press [Done].

If you specify the destination using

– (numeric keys) or New Address tab, press [Direct] on the same screen.

7 Press (Start).

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display, then press (Start) once for each original. When scanning is complete, press [Done].

As soon as transmission is possible, the original is scanned and sent while scanning is taking place.

During transmission, the transaction number and page number currently being sent are displayed in the Job Monitor area.

If the transmission completes successfully, the message <Sent OK> appears in the message area for approximately two seconds. After the original has been sent, Direct Sending is canceled automatically.

To cancel transmission, press [Cancel] (Stop). Scanning and transmission of documents are canceled from the time you cancel the transmission.

Documents Sending

4‑55