6

7

①Specify the scan settings.

② Press [OK].

<>

①Enter the recipient’s fax number (up to 120 characters) using – (numeric keys).

②You can also specify the destination by pressing [One-touch Buttons].

You can enter an extension number after dialing the fax number.

[Tone]: Press when you want to directly call an extension line that is connected to a PBX (Private Branch Exchange), which accepts only tone signals. If you press [Tone], the letter <T> appears. [One-touch Buttons]: Press to specify destinations using the one-touch buttons.

(See “Using the One-Touch Buttons,” on p. 4‑45.)

[Scan Settings]: Press to set the Scan mode. (See “Scan Settings,” on p. 4‑16.)

–You cannot use group dialing for manual sending.

–To cancel manual sending, press [End].

8 When you hear a high-pitched tone, press (Start).

Scanning starts and the document is sent. During the transmission, the transaction number and page number are displayed in the Job Monitor area.

To cancel manual sending, press [Cancel].

Documents Sending

4‑53