4 Hold down the four corners of the

5 Load the envelopes, as shown below.

envelopes firmly, so that they and the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sealed or glued portion stay flat.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Original and Paper

`

Feeding

Direction

The screen for selecting the paper size appears.

– Do not print on the back side of the

 

– The stack bypass can hold 10 envelopes

envelopes (the side with the flap (A)).

 

at a time.

– If the envelopes become filled with air,

 

– Envelopes may be creased in the

flatten them by hand before loading

 

printing process.

them into the stack bypass.

4

 

 

Specify the size and the type of the

 

 

paper you load.

 

 

For details on how to specify the paper size

 

 

and type, see “Setting Paper Size and Type for

 

 

the Stack Bypass,” on p. 2‑21.

The paper size/type setting in the [Stack Bypass] setting screen is available if Stack Bypass Standard Settings is set to [Off] in Common Settings (from the Additional Functions screen). If Stack Bypass Standard Settings is set to [On], copying can be performed only for the registered paper size and type. (See, “Setting Paper Size and Type,” on p. 2‑19.)

2‑18