Scan Density and Original Type Settings

You can set the scan density and select the original type before scanning the original.

●Manual Density Adjustment

You can manually adjust the scan density to the most appropriate level for the original.

If you select the Color mode, you should manually adjust the scan density.

Sending Documents

1 Press (SEND).

2 Place your originals.

3

①Specify the destination.

② Press [Scan Settings].

③ Press [Option].

For instructions on specifying destinations, see “Specifying Destinations,” on p. 4‑32.

4

5

①

②

①Press [Light] or [Dark] to adjust the scan density.

Press [Light] to move the indicator to the left to make the density lighter, or press [Dark] to move it to the right to make the density darker.

②Press [OK].

Press (Start).

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display, then press (Start) once for each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning is complete.

–To cancel the scan settings, press [Scan Settings], then press [Option], then [Cancel].

–To cancel all settings and return the machine to the Standard mode, press (Reset).

4‑24