Available Paper Sizes

When received documents are printed, they are printed from the paper drawer that has the same size paper as the received document. If all of the settings in Select Cassette in RX Settings under <Common Settings> in Communications Settings are set to [On], and paper of the correct size is not available, the machine automatically selects a different paper size in the following order. The paper size is automatically selected in the same order, even if paper runs out during printing.

Available Paper Sizes for Received Documents

11" x 17" originals

11" x 17" LGL* LTR* STMT x 2

LGL originals

LGL LTR* 11" x 17" STMT x 3

LTR originals

LTR LGL 11" x 17"STMT x 2

STMT originals

STMT LTR LGL 11" x 17"

*Received documents are automatically reduced or separated before being printed on the paper size indicated.

The order of paper selection may differ depending on the resolution set on the sending party’s machine.

Received documents can be printed on the following paper sizes and paper types:

Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTR

Paper Types: plain or recycled

You can specify any paper drawer to receive fax/I-fax documents. The default setting is [On], except for the stack bypass.

You can set the machine to reduce received documents by 75%, 90%, 95%, or 97% if the document is larger than any of the available paper sizes. (See Chapter 4, “Sending and Receiving,” in the Reference Guide.)

You can change the order of paper selection. (See Chapter 4, “Sending and Receiving,” in the Reference Guide.)

You can set the machine to print received documents on both sides of the paper. (See Chapter 4, “Sending and Receiving,” in the Reference Guide.)

Received documents are output face down, in the order in which the pages are received.

Documents Receiving

511