Feeder

AFeeder Cover

Open this cover to remove jammed originals.

BSlide Guides

Adjust the slide guides to match the width of the original.

COriginal Supply Tray

Originals placed here are automatically fed sheet by sheet to the scanning area of the platen glass. Place originals into this tray with the surface that you want to scan face up.

DOriginal Output Area

Originals that have been scanned from the original supply tray are output to the original output area in the order that they are fed into the feeder.

–Do not insert your fingers into the gaps around the original supply tray, as your fingers may get caught. Also, be careful not to drop objects, such as paper clips into the gaps, as doing so may cause damage to the machine or cause it to break down.

–When using the platen glass to copy or scan thick originals, such as books or magazines, do not press down hard on the feeder.

–If the original output area is blocked, originals may get damaged, and printing may not be performed correctly. Therefore, do not place any objects in the original output area.

Machine the Using Before

1‑3