Replacing the Stamp Cartridge

Originals can be stamped to indicate that they have been sent. Replace the stamp cartridge when this mark is faint or no longer visible.

When replacing the stamp cartridge, take care not to allow ink to come in contact with your hands or clothing. If ink gets onto your hands or clothing, wash it off immediately with cold water.

1

Open the feeder cover, then open

3

Insert a new stamp cartridge into

 

the inner cover (B) by holding its

 

the feeder using the tweezers until

 

front tab for removing the old

 

it clicks.

 

stamp cartridge (A).

 

 

Maintenance

2 Remove the old stamp cartridge using the tweezers.

Widen the tweezers if necessary.

–Set the stamp cartridge so that the two projections on the cartridge are aligned with the hollows on the feeder.

–Be careful that the stamping surface of the stamp cartridge does not protrude.

–Insert the stamp cartridge properly, or it may cause paper jams.

10‑12