Canon 2237B001AA, 2237B008, 2237B008AA bypass, Open the stack bypass

1

Open the stack bypass.	3	Load the paper into the stack
		bypass.

Original and Paper

If the paper size you are going to load into the stack bypass is different from the paper size stored in Stack Bypass Standard Settings, set Stack Bypass Standard Settings to [Off] in Common Settings (from the Additional Functions screen). (See “Setting Paper Size and Type for the Stack Bypass,” on p. 2‑21.)

Make sure that the height of the paper stack does not exceed the loading limit mark ( ).

When you use the stack bypass to make copies, straighten out curled paper prior to use, as shown below.

2

Adjust the slide guides (A) to match the size of the paper.

If you are feeding large size paper, pull out the auxiliary tray (A), and extend the tray extension (B).

Curled paper may cause a paper jam.

–If there is difficulty in straightening out curled paper, curl the front edges of the paper upward, as shown below.

2‑16