●Erasing One-Touch Buttons

1 Press (Additional Functions).

2

If a password has been set for the Address Book, enter the password using – (numeric keys), then press [OK] to enter the Address Book Settings menu. (See Chapter 8, “System Settings,” in the Reference Guide.)

– If the desired one-touch button is not

displayed, press [▼] or [▲] to scroll to the

desired one-touch button.

– You can also specify the one-touch

button’s number by entering the three

digit number of the desired one-touch

button using – (numeric keys).

– Make sure that you verify the settings first

before you erase them.

– One-touch buttons that already have

destinations stored in them are displayed

with a black square (■) in the lower right

corner of the key.

– If you select a one-touch button that

already has destinations stored in it, the

destinations are displayed.

– If you register multiple destinations as a

Documents Sending

3

4

5

①

group address in a one-touch button, the

number of destinations registered in the

group address is displayed.

To cancel erasing, press [No].

②

6

 

 

① Select a one-touch button containing the

 

destination(s) you want to erase.

 

②Press [Erase].

The message <Erased.> appears for approximately two seconds on the touch panel display.

Press [Done] repeatedly until the Send Basic Features screen appears.

4‑85