Setting Paper Size and Type for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This setting is useful if you always load the same paper size and type into the stack bypass.

–When printing on special types of paper, such as heavyweight paper or transparencies, be sure to correctly set the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.

–If you are using the stack bypass as a paper source for the Copy function, you must select the stack bypass when specifying the Drawer Eligibility for APS/ADS setting. (See “Automatic Paper Selection/Automatic Drawer Switching,” on p. 2‑25.)

and Original

1

2

3

Press (Additional Functions).

①

①Press [▼] until [Stack Bypass Standard Settings] appears.

4

5

6

①

②

①Press [On].

② Press [Store].

Select the desired paper size.

Paper

2‑21