Printer Settings

1. IMAGE REFINEMENT

Sets whether to print smoothly the jagged outlines of

characters and graphics.

–ON

–OFF

 

 

The results of image refinement may be different depending on the

 

 

types of characters and graphics you want to print.

 

 

 

2.

DENSITY

Adjusts the print density. (1-9)

3.

TONER SAVER

Sets whether the toner saving mode is enabled.

 

 

– OFF

 

 

– ON

 

 

If [ON] is selected for Toner Saver, very light or finely detailed

 

 

images may not be printed clearly.

 

 

6. PAGE LAYOUT

Sets the printing layout.

 

 

 

1.

BINDING

Sets the binding position for two-sided printing.

 

 

– LONG EDGE

 

 

– SHORT EDGE

 

 

– You cannot create a binding margin with this setting alone. Use

 

 

this setting in combination with the Margin setting to create a

 

 

binding margin.

 

 

– For two-sided printing, the orientation of the image on the back

 

 

side of the page may be changed by this setting.

 

 

 

2.

MARGIN

Sets the page margin in inches or millimeters.

 

 

– INCHES (-01.90INCHES–01.90INCHES)

 

 

– mm (-50.0 mm–50.0 mm)

 

 

– If this setting moves the image outside the printable area, part of

 

 

the image may be cut off.

 

 

– Pressing [▶] increases the setting value by 0.01" (0.5 mm) each

 

 

time the key is pressed. Pressing [◀] decreases the value by 0.01"

 

 

(0.5 mm) each time. Holding down either [◀] or [▶] continuously

 

 

speeds up the value alteration.

Settings Machine

12‑21