Canon 2237B001AA, 2237B008, 2237B008AA manual 367

	System Settings
	SMTP Authentication	Sets whether to use the SMTP server requires SMTP
	(SMTP AUTH)	Authentication (method for authenticating users who have
		logged in the POP server before sending e-mail).
	Off	Disables SMTP Authentication.
	On	Enables SMTP Authentication.
		–	User
		–	Password
	SMTP Server	Registers the SMTP server name.
	E-mail Address	Enters the e-mail address your machine will use (max. 64
		characters).
	POP Server	Enters the POP server IP address or name (max. 48
		characters).
	POP Address	Enters the login name for access to the POP server (max. 32
		characters).
	POP Password	Enters the password for access to the POP server (max. 32
		characters).
	POP Interval	Sets the interval you want the POP server to check for
		incoming e-mail. If the interval is set to 0, the POP server is
		not checked automatically. (1-99)
	Startup Time Settings	Sets the time period required to delay the startup of network
		communications for the machine (0-300sec).
	Communications Settings	Sets the fax and e-mail/I-fax communication.
	E-mail/I-Fax Settings*1	Sets the e-mail/I-fax communications.
	Maximum TX Data Size	Sets the maximum data size for outgoing e-mail messages
		and I-fax documents. If the e-mail message send job exceeds
		this data size limit, it is split up into several e-mail messages
Settings		before being sent. However, if an I-fax transmission exceeds
		the data size limit, it is handled as an error, and it is not sent.
Machine		(0MB-99MB)
	Divided TX over Max.Data	Sets whether to divide a document into separate files when it
	Size	is sent if its size exceeds the data size you specify.
		–	Off
		– On
	Default Subject	The subject that you enter here is used as the default subject
		whenever you do not enter a subject when sending a job.

*1 Indicates the item that appear only for the imageCLASS MF7480.

12‑38