Communications Settings

 

 

 

 

 

Auto Redial

Sets whether to redial automatically when the other line is

 

 

busy or a transmission error occurs. (See Chapter 4, “Sending

 

 

and Receiving,” in the Reference Guide.)

 

 

 

 

Redial Times

Sets the number of retries. (1 times−10 times)

 

 

 

 

Redial Interval

Sets period of time before redialing. (2 min.−99 min.)

 

Transmission Error Redial

Sets whether the machine redials automatically when

 

 

transmission error occurs.

 

 

– On

 

 

– Off

 

Check Dial Tone Before

Sets whether to check the telephone line condition.

 

Sending

– Off

 

 

– On

 

Rotate Send

Sets whether to use the TX Rotation function. TX Rotation

 

 

function automatically corrects the orientation of the

 

 

document by rotating the image when sending. For example,

 

 

if you set a document that has a horizontal orientation

 

 

vertically on the machine, the machine rotates the image and

 

 

sends it horizontally.

 

 

You can use the TX Rotation mode for an LTR document only.

 

 

The TX Rotation mode is not available if you are using the

 

 

Direct Sending or Manual Sending.

 

 

– On

 

 

– Off

 

RX Settings

Sets the reception features.

 

 

 

 

ECM RX

Sets whether the ECM (Error Correction Mode) reception is

 

 

activated.

 

 

– On

Machine Settings

 

– Off

 

 

 

 

12‑16