●To prevent paper jams, do not use any of the following:

–Wrinkled or creased paper

–Curled or rolled paper

–Coated paper

–Torn paper

–Damp paper

–Very thin paper

–Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side.)

●The following types of paper do not print well:

–Highly textured paper

–Very smooth paper

–Shiny paper

●Make sure the paper is free from dust, lint, and oil stains.

●Be sure to test paper before purchasing large quantities.

●Store all paper wrapped and on a flat surface until ready for use. Keep opened packs in their original packaging in a cool, dry location.

●Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity.

●Use only the transparencies designed for laser printers. Canon recommends you to use Canon type transparencies with this machine.

●Each paper drawer holds approximately 250 sheets of paper (22 lb bond (80 g/m2)).

●Note the following points when using the stack bypass:

–Paper Quantity: one to approximately 80 sheets (22 lb bond (80 g/m2), stack approximately 3/8" (10 mm) high)

–Paper Size: 3 3/4" x 5 7/8" to 11 3/4" x 17" (95 mm x 148 mm to 297 mm x 432 mm)

–Paper Weight: 18 to 32 lb bond (64 to 128 g/m2)

–Paper which has been rolled or curled must be straightened out prior to use, to allow the paper to feed smoothly through the stack bypass (allowable curl amount: less than 3/8" (10 mm) for normal paper, less than 1/4" (5 mm) for heavyweight paper). There are some types of paper stock which may meet the above specifications, but cannot be fed into the stack bypass.

●You can select standard inch paper, or A or B series paper.

Paper and Original

2‑13