Canon 2237B001AA, 2237B008, 2237B008AA 1 Lift the feeder, On the Platen Glass, Gently close the feeder, 2 Place your original face down

On the Platen Glass

The machine automatically detects the size of the following originals: 11" x 17", LGL, LTR, and LTRR.

1 Lift the feeder.

		Place books and other bound originals on the
		platen glass in the same way.
		When you are enlarging an LTR or STMT
		original onto 11" x 17" or LGL paper, place the
This machine is equipped with an open/close		original horizontally on the platen glass, and
sensor (A) on the feeder (see circled area		align it with the LTRR or STMTR marks.
in the above illustration). When placing	3
originals on the platen glass, lift the feeder		Gently close the feeder.
high enough so that the sensor does not
touch the feeder. If the sensor continues to
touch the feeder, the size of the originals may
not be detected correctly.

Paper and Original

2 Place your original face down.

The surface of the original that you want to scan must be placed face down.

Align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner).

–Close the feeder gently to avoid catching your hands, as this may result in personal injury.

–Do not press down hard on the feeder when using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury.

2‑7