Canon 2237B001AA, 2237B008, 2237B008AA manual 316

Message	Description		Action
LTR Load paper.	The optimum paper size	– Load the indicated paper
	selected by the Automatic		size into the machine. If you
	Paper Selection mode is not		press (Start) while this
			message is displayed, prints
	available in the machine.
			are made with the currently
			selected paper size.
		–	When the message
			continues to be displayed
			even if the indicated paper
			size is loaded, set Drawer
			Eligibility For APS/ADS in
			Common Settings (from the
			Additional Functions screen)
			for that paper drawer to
			[On]. (See “Automatic Paper
			Selection/Automatic Drawer
			Switching,” on p. 2‑25.)
No response.	– The server was not running	–	Check the destination.
(imageCLASS MF7480/	when you tried to send.
MF7470 Only)	– The network connection	– Check the status of the
	was lost when you tried to		network.
	send. (Either you could not
	connect to the destination
	or the connection was
	lost before the job could
	complete.)
	– A TCP/IP error occurred	– Check that the network
	when you tried to send an		cables and connectors are
	e-mail or I-fax.		properly connected.
No response from the server.	The specified server settings	Wait for a while, and try
Check the settings.	are incorrect, or the server is	browsing again. If you still fail,
(imageCLASS MF7480/	not turned ON. Alternatively,	try selecting another server.
MF7470 Only)	the machine’s TCP/IP resources
	may be low.
Out of resources. Wait for	You cannot browse the	Wait for a while, and try
a moment, then perform	network due to a lack of TCP/IP	browsing again.
operation again.	resources. This may be because
(imageCLASS MF7480/	documents have just been
MF7470 Only)	continuously sent or are being
	continuously sent through FTP
	or Windows (SMB).

Troubleshooting

11‑19