Sending Documents

Job Recall

You can recall the last three destinations, scan settings, and send settings that have been set, and then send your documents.

–The machine considers any one of the following operations a send job:

–When settings, such as the destination, scan settings, and send settings, are specified, and the control panel power switch, (Start), or (Reset) is pressed

–When the Auto Clear mode activates after the send settings are specified

–The Standard mode is not stored in Recall memory.

–The three most recent settings that were stored in memory are not erased even when the power is turned off.

1

Press

(SEND).

– If there are more stored Send settings

 

 

 

 

 

2

 

 

 

 

than are currently displayed, you can scroll

Place your originals.

through the list by pressing [▼] or [▲].

 

 

 

 

 

– You can change the settings for a recalled

3

 

 

 

 

send job.

 

 

 

 

 

– If there are multiple destinations stored

 

 

 

 

 

in Recall memory, the order of the

 

 

 

 

 

destinations shown in the list may not

 

 

 

 

 

correspond to the order in which they were

 

 

 

 

 

specified.

 

 

 

 

5

Press (Start).

4

 

 

 

 

If the original is placed on the platen glass,

 

 

 

 

 

 

 

 

follow the instructions that appear on the

 

 

 

 

 

touch panel display, then press (Start) once

 

 

 

 

 

for each original. When scanning is complete,

 

 

 

 

 

press [Done].

 

 

 

 

 

Scanning starts.

 

 

 

①

 

The scanned data is sent to the specified

 

 

 

 

 

destination when scanning is complete.

 

 

 

②

 

 

 

 

 

 

 

 

①Select [1 Before], [2 Before], or [3 Before].

② Confirm the settings, then press [OK].

4‑56