●Automatic Density Adjustment

The machine automatically adjusts the scan density to the level best suited to the quality of the original.

–If you select the Color mode, automatic density adjustment cannot be used.

–If you set the automatic density adjustment, the original type setting is disabled.

1

2

3

Press (SEND).

Place your originals.

An automatic scan density adjustment may not work with transparencies. In this case, adjust the scan density manually by pressing [Light] or [Dark].

5 Press (Start).

Sending

①Specify the destination.

② Press [Scan Settings].

③ Press [Option].

For instructions on specifying destinations, see “Specifying Destinations,” on p. 4‑32.

4

①

②

①Press [A].

② Press [OK].

The machine automatically adjusts the scan density to the level best suited to the quality of the original.

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display, then press (Start) once for each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning is complete.

–To cancel the scan settings, press [Scan Settings], then press [Option], then [Cancel].

–To cancel all settings and return the machine to the Standard mode, press (Reset).

Documents

4‑25