Entering Characters

For screens that require alphanumeric entries, enter characters using the keys displayed on the touch panel display, as shown below.

●Alphanumeric Characters

Example: Enter <Canon>.

1

①Make sure that <Alphabet> is displayed above [Entry Mode].

Each press of [Entry Mode] switches the

entry mode between <Alphabet> and <Other>.

②Enter <Canon>.

–To enter uppercase letters, press [Shift].

–To enter a space, press [Space].

–To move the cursor, press [◀] or [▶].

–To enter symbols, press [Entry Mode] to select [Other], then enter the desired symbols.

–If you make a mistake when entering characters, press [◀] or [▶] to position the cursor on the right side of the characters to be deleted, then press [Backspace] to delete the characters and enter the correct characters.

–To delete all of the characters you have entered, press (Clear).

–The available entry modes, and the maximum number of characters that you can enter vary, depending on the type of entries you are making.

③Press [OK].

Machine the Using Before

1‑13