67

①Select [A4], [A4R], [B5], [B5R], [LTR], or [LTRR].

②Press [OK].

–[Rotate] can be selected only in the following cases:

–If the available paper size is selected manually

–If the available paper size is loaded in both the horizontal and vertical directions

–The selected paper source must have Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) set to [On]. (See “Drawer Eligibility For APS/ADS,” on p. 12‑7.)

–When you have selected Automatic Paper Selection for the Rotate mode, make sure to select a paper size which can be rotated. Otherwise, output will not be rotated.

–If there is no paper which can be rotated, output will be collated.

Same Page (Group)

1 Press (COPY).

3

2 Place your originals.

Press (Start).

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display. Press (Start) once for each original. When scanning is complete, press [Done].

–To cancel this setting, press [Finishing], then press [Cancel].

–To cancel all settings and return the machine to the Standard mode, press (Reset).

Copying

3‑23