Dell DR715, T605 owner manual Installing Optical or Tape Drive Shoulder Screws

5Remove the expansion card shroud. See "Removing the Expansion Card Shroud" on page 72.

6If another drive is installed, remove it (see "Removing an Optical or Tape Drive" on page 97) and remove the three shoulder screws to attach to the new drive (see Figure 3-21).

7If the drive bay is empty, remove the insert on the front drive bezel. See "Removing an Insert on the Front Drive Bezel" on page 67.

8Remove the three shoulder screws from the insert, and attach one of them to the top row of holes and two to the bottom row of holes on the drive. See Figure 3-21.

Figure 3-21. Installing Optical or Tape Drive Shoulder Screws

1

1 screws (3)

9Gently slide the drive into place until you hear a click or feel the drive securely installed.

10Attach the SCSI/PATA power cable (see Figure 3-18), SATA power cable (see Figure 3-19), or SAS cable (see Figure 3-20) to the drive. Ensure that cables are secured in their respective clips.

102

Installing System Components