Dell T605, DR715 owner manual 131, Installing and Removing a Memory Module Memory module

Figure 3-33. Installing and Removing a Memory Module

1

			2
			3
			4
1	memory module	2	memory module socket ejectors (2)
3	memory module socket	4	alignment key

7Align the memory module's edge connector with the alignment key on the memory module socket, and insert the memory module in the socket.

NOTE: The memory module socket has an alignment key that allows you to install the memory module in the socket in only one way.

8Press down on the memory module with your thumbs while pulling up on the ejectors with your index fingers to lock the memory module into the socket.

When the memory module is properly seated in the socket, the ejectors on the memory module socket align with the ejectors on the other sockets that have memory modules installed.

9Repeat step 6 through step 8 of this procedure to install the remaining memory modules.

10Install the processor shroud. See "Installing the Processor Shroud" on page 74.

11Install the expansion card shroud. See "Installing the Expansion Card Shroud" on page 75.

Installing System Components

131