Dell DR715, T605 owner manual 134, Release levers Thermal grease

5Remove the processor shroud. See "Removing the Processor Shroud" on page 72.

NOTICE: When you remove the heat sink, the possibility exists that the processor might adhere to the heat sink and be removed from the socket. It is recommended that you remove the heat sink while the processor is still warm.

NOTICE: Never remove the heat sink from a processor unless you intend to remove the processor. The heat sink is necessary to maintain proper thermal conditions.

6Unlatch the two heat-sink release levers by pressing down on the ends of the levers and pulling them outward, releasing them from the release lever retainers. Swing the levers up to release the heat sink. See Figure 3-34.

Figure 3-34. Installing and Removing the Heat Sink

4 1

3

			2
1	heat sink	2	release lever retainers (2)
3	release levers (2)	4	thermal grease

134

Installing System Components