Dell T605, DR715 owner manual

•Tape backup unit

•Optical drives

6Remove the two screws that secure the power supply to the system. See Figure 3-8.

7Press the power supply release tab, and slide the power supply out from the back of the system. See Figure 3-8.

8If you plan to replace a non-redundant power supply with redundant power supplies, you will need to replace the power supply cage cover with the power supply distribution board and its shroud.

a Remove the power supply cage cover by pulling the blue release pins until they unlock from the power supply cage, and lift the cover out of the chassis. See Figure 3-41.

b Install the power supply distribution board and its shroud. See "Installing the Power Supply Distribution Board" on page 147.

Installing System Components

79