Dell T605, DR715 Connect the power cable to the drive, Installing Diskette Drive Shoulder Screws

Figure 3-16. Installing Diskette Drive Shoulder Screws

1

1 screws (4)

10From the front of the chassis, slide the drive into the drive bay until the shoulder screws fit into their slots and snap securely into the sliding plate.

11Connect the power cable to the drive.

12Connect the data cable from the drive to the diskette drive connector (FLOPPY) on the system board. See Figure 6-1 for the connector location.

13Route the diskette drive data cable through the ribbon cable notch and ribbon cable guides in the processor shroud as shown in Figure 3-17.

Installing System Components

95