Dell DR715, T605 Installing the Chassis Intrusion Switch, Intrusion connector on system board

Figure 3-37. Removing and Installing the Chassis Intrusion Switch

2

1

3

1 securing bracket notch 2 chassis intrusion switch

3INTRUSION connector on system board

Installing the Chassis Intrusion Switch

1Align the chassis intrusion switch with the securing bracket notch. See Figure 3-37.

2Slide the switch into the securing bracket notch.

3Connect the switch cable to the INTRUSION connector on the system board. See Figure 6-1 for the connector location.

4Install the expansion card shroud. See "Installing the Expansion Card Shroud" on page 75.

5Close the system. See "Closing the System" on page 70.

6Place the system upright and on its feet on a flat, stable surface.

142

Installing System Components