Dell T605, DR715 owner manual E1414, Thermtrip, E1418, Presence, E141C CPU Mismatch

Table 1-5. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1414	CPU #	Specified microprocessor is	See "Troubleshooting
	Thermtrip	out of acceptable	System Cooling
		temperature range and has	Problems" on page 172. If
		halted operation.	the problem persists,
			ensure that the
			microprocessor heat sinks
			are properly installed (see
			"Troubleshooting the
			Microprocessors" on
			page 189).
			NOTE: The LCD continues
			to display this message
			until the system’s power
			cable is disconnected and
			reconnected to the AC
			power source, or the SEL is
			cleared using either Server
			Assistant or the BMC
			Management Utility. See
			the Dell OpenManage™
			Baseboard Management
			Controller User’s Guide for
			information about these
			utilities.
E1418	CPU #	Specified processor is	See "Troubleshooting the
	Presence	missing or bad, and the	Microprocessors" on
		system is in an unsupported	page 189.
		configuration.
E141C	CPU Mismatch	Processors are in a	Ensure that your
		configuration unsupported	processors match and
		by Dell.	conform to the type
			described in the
			Microprocessor Technical

Specifications outlined in your system’s Getting Started Guide.

About Your System

23