Dell T605, DR715 owner manual Installing a RAID Battery, 115

Installing a RAID Battery

1Insert the RAID battery into the battery carrier. See Figure 3-28.

2Locate the battery bay towards the front of the chassis next to the hard drive bay (see Figure 3-28).

3Insert the battery carrier and RAID battery into the system’s battery carrier slots, ensuring that the battery carrier is aligned and fully seated in the slots.

4Connect the battery cable to the SAS/RAID controller card. See the documentation for your card for more information.

5Route the battery cable through the cable guides on the side of the processor shroud and through the battery cable slot in the chassis. See Figure 3-28 for the slot location.

Installing System Components

115