Figure 3-9. Removing and Installing a Hard Drive

23

1

4

1

hard drive

2

data cable

3

power cable

4

carrier release tab (2)

NOTE: If you do not intend to replace the drive, it is recommended that you remove the drive from the guide bracket (see Figure 3-10) and insert the empty guide bracket back into the drive bay. This eliminates the likelihood that the empty bracket will be misplaced or improperly stored while not in use.

5Close the system. See "Closing the System" on page 70.

6Place the system upright and on its feet on a flat, stable surface.

7Reattach any peripherals, then connect the system to the electrical outlet.

8Turn on the system and attached peripherals.

Installing System Components

83

Page 83
Image 83
Dell T605, DR715 owner manual Carrier release tab