Dell DR715 E201F Drac Config, E2020 CPU Config, E2021 Memory, Population, E2022 Post Fail, E2110

Table 1-5. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E201F	DRAC Config	Dell remote access	Check screen for specific
		controller (DRAC)	error messages.
		configuration failure.	Ensure that DRAC cables
			and connectors are
			properly seated. If
			problem persists, see your
			DRAC documentation.
E2020	CPU Config	Processor configuration	Check screen for specific
		failure.	error messages.
E2021	Memory	Incorrect memory	Check screen for specific
	Population	configuration. Memory	error messages (see
		population order incorrect.	"Troubleshooting System
			Memory" on page 174).
E2022	POST Fail	General failure after video.	Check screen for specific
			error messages.
E2110	MBE DIMM # &	One of the DIMMs in the	See "Troubleshooting
	#	set implicated by "# & #"	System Memory" on
		has had a memory multi-bit	page 174.
		error (MBE).
E2111	SBE Log	The system BIOS has	See "Troubleshooting
	Disable DIMM	disabled memory single-bit	System Memory" on
	#	error (SBE) logging, and will	page 174.
		not resume logging further
		SBEs until the system is
		restarted. "#" represents the
		DIMM implicated by the
		BIOS.
E2112	Mem Spare	The system BIOS has spared	See "Troubleshooting
	DIMM #	the memory because it has	System Memory" on
		determined that the	page 174.
		memory had too many
		errors. "# & #" represents
		the DIMM pair implicated
		by the BIOS.

30

About Your System