Dell T605, DR715 owner manual Entering the BMC Setup Module, BMC Setup Module Options

•Provides text console redirection for system setup, text-based utilities, and operating system consoles

NOTE: To remotely access the BMC through the integrated NIC, you must connect the network connection to integrated NIC1.

For additional information on using BMC, see the documentation for the BMC and systems management programs.

Entering the BMC Setup Module

1Turn on or restart your system.

2Press <Ctrl-E> when prompted after POST.

If your operating system begins to load before you press <Crtl-E>, allow the system to finish booting, and then restart your system and try again.

BMC Setup Module Options

For information about the BMC Setup Module options and how to configure the emergency management port (EMP), see the BMC User’s Guide.

Using the System Setup Program

61