NOTICE: To prevent damaging the processor, do not pry the heat sink off of the processor.

12Remove the processor(s). See "Removing a Processor" on page 133.

13If applicable, remove the SAS/SATA backplane. See "Removing the SAS/SATA Backplane" on page 148.

14Carefully route any loose cables away from the edges of the system board.

15Remove the system board from the chassis. See Figure 3-44. a Pull and hold the blue system board release pin.

b While holding the release pin and the system board touch point, slide the system board towards the front of the system, and lift the board out of the chassis.

Figure 3-44. Removing and Installing the System Board

2

3

1

4

1

system board release pin

2

system board

3

system board touch point

4

system board securing slots

Installing System Components

155

Page 154 Page 156
Page 155
Image 155
Dell T605, DR715 owner manual 155
Page 154 Page 156
Top Page Image Contents